PR1050X
FAQs & Troubleshooting |
Setting the machine to stop at color changes
The machine can be stopped at any time; however, if the machine is stopped while it is embroidering, it is better to go back a few stitches before continuing sewing to overlap the stitching. If the machine stops at a color change, it is not necessary to go back through the stitching before continuing embroidering.
The machine can be set to stop before sewing the next color.
If the machine is temporarily turned off, you will be asked if you wish to continue sewing or select a new pattern when the machine is turned on again.
Touch to continue embroidering.
* Refer to "How do I resume embroidering after turning off the machine ?"
Pause locations can be specified in the pause setting screen, displayed by touching .
→ The change thread color screen appears.
(1) Scroll bar
→ The mark appears to indicate where the machine will stop.
(1) mark
• To cancel the setting, touch again.
• If the machine is temporarily turned off when it is stopped at the specified location after embroidering, you will be asked if you wish to continue sewing or select a new pattern when the machine is turned on again.
Touch to continue embroidering.
* Refer to "How do I resume embroidering after turning off the machine ?"