Print  |  Close

5100D

FAQs & Troubleshooting

FAQs & Troubleshooting

Retracting knife

To sew without cutting the fabric edge, you need to retract the knife as follows.

 

  • Do not touch the knife.
  • Move the knife lever only while the needle is at its lowest point.
  • Be sure to unplug the power supply cord from the wall outlet before retracting the knife.

 

  1. Pull up the knife lever <A>, then pull it to the right.

    Pull up the knife lever, then pull it to the right.

     

  2. Bring down the knife.

    Bring down the knife.

     

  3. Retract the knife completely, then take your hand off from the lever.

    Retract the knife completely, then take your hand off from the lever.

 

Print  |  Close