If the threads will be pulled to create gathers or the thread at the beginning of sewing will be finished, for example, when free motion quilting, first pull up the bobbin thread.
-
Refer to “How do I thread the machine (Threading the upper thread)? ” to thread the machine with the upper thread and thread the needle.
-
Turn on the machine.
-
Press
(Needle position button) once or twice to raise the needle.
-
Turn off the machine.
-
Raise the presser foot lever.
-
Slide the bobbin cover latch to the right and remove the bobbin cover.
![img02 img02](/g/b/img/faqend/faqh00000477_012/as_ot/en/1557655/faqh477_fig1008.gif)
-
Insert the bobbin into the bobbin case so that the thread unwinds to the left.
![img03 img03](/g/b/img/faqend/faqh00000477_012/as_ot/en/1557657/faqh477_fig1009.gif)
-
Pass the bobbin thread through the slot.
Do not cut the thread with the cutter, otherwise it will be difficult to pull up the bobbin thread.
![img04 img04](/g/b/img/faqend/faqh00000477_012/as_ot/en/1557648/faqh477_fig1001.gif)
-
Turn on the machine.
-
While lightly holding the upper thread with your left hand, press
(Needle position button) twice to lower and then raise the needle.
![img06 img06](/g/b/img/faqend/faqh00000477_012/as_ot/en/1557649/faqh477_fig1002.gif)
>> The bobbin thread is looped around the upper thread and can be pulled up.
-
Carefully pull the upper thread upward to pull out the end of the bobbin thread.
![img07 img07](/g/b/img/faqend/faqh00000477_012/as_ot/en/1557650/faqh477_fig1003.gif)
-
Pull up the bobbin thread, pass it under the presser foot and pull it about 10 cm (4 inches) toward the back of the machine, making it even with the upper thread.
![img08 img08](/g/b/img/faqend/faqh00000477_012/as_ot/en/1557651/faqh477_fig1004.gif)
-
Reattach the bobbin cover.