Innov-is 1500D/1500
![]() |
FAQs & Troubleshooting |
How do I thread my machine (Threading the upper thread)?
![]() |
![]() |
This machine is equipped with an upper thread shutter, allowing you to check that the upper threading is performed correctly.
If you try to thread the needle with the needle threader lever without raising it, damage to the machine may result.
![]() |
![]() ![]() |
![]() |
![]() ![]() ![]() |
![]() |
![]() ![]() |
When passing the thread through the lower notch in the thread guide plate, then through the upper notch, be sure to use both hands. If you do not hold the thread with your right hand, the thread will be loose and you cannot hang the thread on the thread guide plate correctly. It may cause incorrect thread tension.
![]() |
![]() |
Look through the take-up lever check window to check the position of the take-up lever. Before threading the machine, make sure that the take-up lever is in the raised position.
Make sure that the thread is passed into the thread take-up lever as shown below.
![]() |
![]() ![]() |
![]() |
![]() |