Innov-is 55P
FAQs & Troubleshooting |
Error Message | Probable Cause | Remedy |
The motor locked up because the thread is tangled. | Turn off the machine and remove the tangled thread before continuing the operation. | |
The start/stop button or the reverse/reinforcement stitch button was pressed (The foot controller was depressed if it is connected.) while the presser foot is raised. | Lower the presser foot before continuing the operation. | |
The reverse/reinforcement stitch button or needle position button was pressed, or the foot controller was operated while the bobbin winder shaft is moved to the right. |
Move the bobbin winder shaft to the left before continuing the operation. | |
The start/stop button was pressed while the foot controller was connected. | Disconnect the foot controller, and then press the start/stop button. Otherwise, operate the machine by using the foot controller. | |
A stitch other than the buttonhole or bar tack stitch was selected and the start/stop button was pressed (The foot controller was depressed if it is connected.) while the buttonhole lever is lowered. | Raise the buttonhole lever before continuing the operation. | |
The buttonhole or bar tack stitch was selected and the start/stop button was pressed (The foot controller was depressed if it is connected.) while the buttonhole lever is raised. | Lower the buttonhole lever before continuing the operation. | |
The start/stop button or reverse/reinforcement stitch button was pressed after a stitch has been deleted. | --- | |
The bobbin winder is winding the bobbin. | --- | |
You tried to combine more than 35 character stitches and utility decorative stitches. | --- | |
The start/stop button was pressed without connecting the foot controller while the setting for adjusting the stitch width using the sewing speed controller is set to [ON]. You have selected a pattern for which width control cannot be used. |
--- | |
The twin needle setting is selected while a pattern that cannot be sewn with the twin needle is selected. | --- | |
The stitch mode was changed. This icon appears when the current pattern is to be deleted. |
--- | |
The selected setting cannot be changed with the selected pattern. | --- | |
A pattern is being saved. Otherwise, the stitch settings are being saved. | --- |