Print
|
Close
DCP-J1200W(XL)
FAQs & Troubleshooting
Copy an ID Card
Use the 2 in 1 ID feature to copy both sides of an identification card onto one page, keeping the original card size.
Make sure the paper size is set to A4 or Letter.
You may copy an identification card to the extent permitted under applicable laws.
For more detailed information
, see the
Product Safety Guide
.
Place your identification card
face down
near the lower-right corner of the scanner glass as shown.
2 in 1 ID (Vertical)
2 in 1 ID (Horizontal)
3 mm or greater (bottom, right)
145 mm
2 in 1 ID (Vertical):
207 mm
2 in 1 ID (Horizontal):
102 mm
Scannable area
Start Brother Mobile Connect on your mobile device.
Tap
Copy
.
Select the
2in1 ID Vertical
or
2in1 ID Horizontal
option from the
Page Layout
list.
Tap
Copy
.
The machine starts scanning one side of the identification card.
After the machine has scanned the first side, the
Power LED
blinks slowly. Turn over the identification card and tap
Continue
to scan the other side.
Print
|
Close