2340CV
![]() |
FAQs & Troubleshooting |
How to remove and install the needle
|
(1) Needle set screw |
Use a new needle that has been determined to be straight according to the instructins in "Checking the needle".
|
(1) Needle set screw |
When front needles are inserted correctly you can see the top of the needle in the window above each needle position.
This machine uses a standard home sewing machine needle.
The recommended needle is SCHMETZ 130/705H (90/#14).
|
(1) Back |
Sewing with a bent needle is extremely dangerous since the needle may break while the machine is being operated.
Before using the needle, place the flat side of the needle on a flat surface and check that the distance between the needle and the flat surface is even.
If the distance between the needle and the flat surface is not even, the needle is bent.
Do not use a bent needle.
|
(5) Flat surface |
Countermeasures for material breakage.
It can reduce the occurrence of material breakage by using SCHMETZ 130/705H SUK (90/#14) BALL POINT.