PS-53/55/57
FAQs & Troubleshooting |
How do I wind the bobbin?
Use only bobbins recommended by the manufacturer of this machine.
Using other bobbins may result in damage or injury.
(1) Spring on the shaft |
When removing the bobbin, do not pull on the bobbin winder seat.
Doing so could loosen or remove the bobbin winder seat, resulting in damage to the machine.
The needle bar does not move when the bobbin winding shaft is slid to the right.
Immediately after winding the bobbin, it is normal to hear the sound of the clutch engaging when beginning to sew or manually turning the handwheel.
Be sure to follow the process described.
If the thread is not cut completely, and the bobbin is wound, when the thread runs low it may tangle around the bobbin and cause the needle to break.