FAX-2480C
FAQs & Troubleshooting |
To solve the problem, make sure the followings:
NOTE: Illustrations shown below are from the representative product and may differ from your Brother machine.
How to clean the machine's printer platen
- Unplug the machine from the AC power outlet.
- Lift the scanner cover until it locks securely in the open position.
- Clean the machine's printer platen(1) and the area around it, wiping off any scattered ink with a soft, dry, lint-free cloth.
Platen type a: Platen type b:
- Close the scanner cover.
• The paper pick-up roller is not dirty.
How to clean the machine's paper pick-up roller
- Pull the paper tray completely out of the machine.
- Unplug the machine from the AC power outlet and remove the Jam Clear Cover (1).
DO NOT place the jam clear cover face down as shown in the illustration. You may damage the cover and cause paper jam.
- Clean the Paper Pick-up Roller (1) with isopropyl alcohol on a cotton swab.
- Put the Jam Clear Cover back on. Make sure the cover is set properly.
- Put the paper tray firmly back in the machine.
- Re-connect the power cord.
To use the paper support flap, pull out the paper support (1) until it clicks and unfold the paper support flap(2).