Model discontinued. This page is no longer updated.

HL-2600CN

FAQs & Troubleshooting

FAQs & Troubleshooting

White streaks or bands appears down the page.


Please check the following points:

  • Identify the missing color and replace that toner cartridge.
    To see how to replace the toner cartridge, click here.

  • The toner has probably reached the end of its life. However, when you see a white vertical line on the toner roller, try the following procedure.

    1. Cut a sheet approx. 1.97 in. x 1.97 in. (50 mm x 50 mm) out of a transparency film.
    2. Insert the film about 2.54 in. (10 mm) into the gap between the toner roller and the blade.
    3. Slide the film and pull it out as shown below.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

HL-2600CN

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.