LS-2125/2160

FAQs & Troubleshooting

FAQs & Troubleshooting

Combination of fabric, thread and needle

navi Needle precautions

navi Selecting the needle depending on the thread and fabric types

navi Checking the needle

 

Needle precautions

Be sure to observe the following precautions concerning the handling of the needle. Failure to observe these precautions is extremely dangerous. Be sure to read and carefully follow the instructions below.

 

  • Only use home sewing machine needles. Use of any other needle may bend the needle or damage the machine.
  • Never use bent needles. Bent needles can easily break, possibly resulting in injury.

top top

 

Selecting the needle depending on the thread and fabric types

The sewing machine needle that should be used depends on the fabric and thread thickness. Refer to the following table when choosing the thread and needle appropriate for the fabric that you wish to sew.
Use the same size thread for the upper (spool) and lower (bobbin) threads.

 

Sewing fabrics Needle sizes Thread sizes
Very thin Fine tricot, Fine lace, Thin linen, Silk, Organza, Chiffon 65/9 Cotton: 80
Synthetic/ Polyester Long Fiber
Fine Mercerized Cotton
Lightweight Voile, Taffeta, Synthetics, Silk, Batiste 75/11 Cotton: 60-80
Silk: “A”
Synthetic/ Polyester Long Fiber
Mercerized 50
Medium weight Cotton, Gingham, Poplin, Percale, Pique, Satin, Velvet, Lightweight wool, Fine corduroy, Suitings, Linen, Muslin 90/14 Cotton: 50-60
Silk: “A”
Synthetic/ Polyester Long Fiber
Mercerized 50-60
Heavyweight Denim, Gabardine, Tweed, Corduroy, Canvas, Duck 100/16 Cotton: 40-50
Mercerized Heavy Duty Polyester Long Fiber
Knits Single knit, Double knit, Jersey, Tricot 90/14
(Ball point)
Cotton Wrapped
Polyester
Polyester Long Fiber

 

  • The smaller the thread number, the thicker the thread; and the larger the needle number, the thicker the needle.
  • Use the ball point needle when sewing on stretch fabrics or fabrics where skipped stitches easily occur.
  • Use a 90/14 to 100/16 needle with transparent nylon threads, regardless of the fabric being sewn.

The appropriate fabric, thread and needle combinations are shown in the table on the previous page. If the combination of the fabric, thread and needle is not correct, particularly when sewing thick fabrics (such as denim) with thin needles (such as 65/9 to 75/11), the needle may bend or break. In addition, the stitching may be uneven or puckered or there may be skipped stitches.

top top

 

Checking the needle

  • Only use sewing machine needles for home use. Other needles may bend or break and cause injury.
  • Never sew with a bent needle. A bent needle will easily break and cause injury.

Sewing with a bent needle is extremely dangerous since the needle may break while the machine is being operated
Before using the needle, place the flat side of the needle on a flat surface and check that the distance between the needle and the flat surface is even.

fig001

(1) Flat side        (2) Needle type marking

 

- Correct needle

fig002

(3) Parallel space        (4) Flat surface

 

- Incorrect needle

If the distance between the needle and the flat surface is not even, the needle is bent. Do not use a bent needle.

fig003

(5) Flat surface

top top

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

LS-2125/2160

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.