EV1-LE

FAQs & Troubleshooting

Machine does not start to sew.

If the machine does not start when you press the Start/Stop button or press the Foot controller, check the following possible causes and solutions.

There is no stitch selected.

Select a stitch pattern.
For details on selecting a stitch pattern, refer to "Basic procedure to sew stitches".
Presser foot is not lowered.

Lower the presser foot.
Refer to "Basic procedure to sew stitches".
Start/Stop button was pressed with the foot controller attached.

When the foot controller is connected, you cannot use the Start/Stop button.
Remove the foot controller to use the Start/Stop button, or use the foot controller to operate the machine.
The Start/Stop button was pressed while the machine is set to the mode to adjust the zigzag stitch width with the speed control slide. ([Width Control] is set to [ON] in the machine's setting screen).

When [Width Control] is set to [ON] in the setting screen, you cannot use the Start/Stop button.
Set the [Width Control] to [OFF] in the settings screen to use the Start/Stop button, or use the foot controller to operate the machine.

Refer to "When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD".
The operation buttons and keys are locked by being set to the presser foot/needle exchange mode.

Touch the Presser foot/Needle exchange key to unlock the keys and buttons.