Under some conditions, based on the type of fabric, stabilizer or thread being used, there may be some looping in the upper thread. In this case, insert the embroidery needle plate cover into the notches on the needle plate as shown below.
(1) Groove
(2) Projection
(3) Notch
Push the embroidery needle plate cover as far as possible to attach it. If the embroidery needle plate cover is not securely attached, it may cause the needle to break and cause injury.
To remove the embroidery needle plate cover, place your fingernail in the groove and lift the plate out
Do not use the embroidery needle plate cover for any applications other than embroidery.
If your question was not answered, have you checked other FAQs?
