QL-820NWB

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 16/10/2019
  • ID: faqp00100421_000

PostScript data cannot be printed or is printed in the text format. (Linux®)

To solve this problem:

  1. Either disable or reconfigure SELinux by referring to the FAQ "Disable or reconfigure SELinux.(Linux®)".
  2. Update your distribution, and then try to print again.

If the problem is still not solved, do the following:

  1. Run the following commands in the terminal to find the file named "filter(printer name)".
      ls /usr/local/Brother/lpd/filter*
     ls /usr/local/Brother/Printer/*/lpd/filter*
     ls /opt/brother/Printers/*/lpd/filter*
     
    There is one "filter(printer name)" file per driver.
    The directory where the file is stored depends on the printer.
    Whether "(printer name)" is upper-case or lower-case also depends on the printer. 
     
  2. Back up the files you found, and then open them using a text editor.
     
  3. Search for the lines beginning with "FILE_TYPE=`file $INPUT...", and replace them with the following:
     "FILE_TYPE=PostScript"
     Enter all the characters exactly as above, including the upper-case and lower-case characters.

If your question was not answered, have you checked other FAQs?

Have you checked manuals?

If you need further assistance, please contact Brother customer service:

Related Models

PT-9700PC, PT-9800PCN, PT-P900W, PT-P950NW, QL-1050, QL-1050N, QL-1060N, QL-580N, QL-700, QL-720NW, QL-800, QL-810W, QL-820NWB, RJ-3050, RJ-3150, RJ-3250WB, RJ-4250WB, TD-4000, TD-4100N, TD-4420DN, TD-4550DNWB

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit