PT-E800T

FAQs & Troubleshooting

FAQs & Troubleshooting

How to install the rechargeable Li-ion battery (optional)

You must attach the battery base (optional*: PA-BB-003) to the printer before installing the rechargeable Li-ion battery (optional: PA-BT-4000LI).
*For E800T/E800TK/E850TKW/D800W only.

The voltage supplied by the rechargeable Li-ion battery fluctuates.
The printing speed may also fluctuate depending on the voltage.
  1. Attaching the battery base
    • Before attaching the battery base, you must disconnect the AC adapter from the printer.
    • For models equipped with the keyboard:
      Before attaching the battery base, remove the keyboard LCD unit from the printer (only for models equipped with the keyboard).
    1. Turn the printer over so that the bottom of the printer is facing up as shown in the illustration.
      Install Li-ion battery 1

    2. Remove the screws and the cover.
      Install Li-ion battery 2
    3. Insert the connector of the battery base into the connector of the printer, and then install the battery base.
      Install Li-ion battery 3
    4. Open the battery cover on the battery base.
      Install Li-ion battery 4
    5. Install the specified screws in the locations indicated in the illustration.
      Install Li-ion battery 5

    For two of the four screws, use the M2.6 × 6 mm screws removed in step 2.

    For the remaining two screws, use the M2.6 × 30 mm screws included with the battery base.

  2. Installing the Li-ion battery
    1. Align the connectors and install the Li-ion battery.
      Install Li-ion battery 6

    2. Close the battery cover, and then turn the printer over so that the top of the printer is facing up.
       Install Li-ion battery 7

  3. Removing the Li-ion battery

    Press and hold the Power button (Power) button to turn the printer off.

    Remove the battery cover and the battery, and then reattach the battery cover.

    If it is difficult to remove the rechargeable battery, turning the printer over with the battery cover removed may allow the rechargeable battery to fall out.

    Be careful that this does not cause any injuries.

If your question was not answered, have you checked other FAQs?

Have you checked manuals?

If you need further assistance, please contact Brother customer service:

Related Models

PT-D800W, PT-E800T

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.