Innov-is BP3700

FAQs & Troubleshooting

FAQs & Troubleshooting

How do I adjust thread tension for embroidering?

 

When embroidering, the thread tension should be set so that the upper thread can slightly be seen on the wrong side of the fabric.
 

 

 

Correct Thread Tension

The pattern can be seen from the wrong side of the fabric. If the thread tension is not set correctly, the pattern will not finish well. The fabric may pucker or the thread may break.

 

image (1) Right side
(2) Wrong side

Follow the operations described below to adjust thread tension according to the situation.

If the thread tension setting is made extremely weak, the machine may stop during embroidering. This is not the sign of a malfunction. Increase the thread tension slightly, and start embroidering again.

  • If you turn the main power to OFF or select a different pattern, the thread tension will reset to the automatic setting.
  • When you retrieve a saved pattern, the thread tension setting will be the same as when the pattern was saved.

 

 

 

 

 

Upper Thread is Too Tight

The tension of the upper thread is too tight, resulting in the bobbin thread being visible from the right side of the fabric.

 

image (1) Right side
(2) Wrong side

If the bobbin thread was incorrectly threaded, the upper thread may be too tight. In this case, refer to How do I set the bobbin ?

 

 
Press image in Tension to weaken the upper thread tension. (The tension number will decrease.)

image

 

▲TOP

 

 

 

 

Upper Thread is Too Loose

The tension of the upper thread is too loose, resulting in a loose upper thread, loose thread locks, or loops appearing on the right side of the fabric.

 

image (1) Right side
(2) Wrong side

If the upper thread was incorrectly threaded, the upper thread may be too loose. In this case, refer to How do I thread my machine ?

 

 

Press image in Tension to tighten the upper thread tension. (The tension number will increase.)

image

 

▲TOP

 

 

 

Adjusting Overall Upper Thread Tension

When embroidering, if the overall tension of the upper thread is too tight or too loose, adjust it from the setting screen.
The selected setting will be applied to all patterns.

 

 

  1. Press image .
    >> The settings screen appears.


     
  2. Press image .
    >> The embroidery settings screen appears.



     
  3. Display [Embroidery Tension] in the embroidery settings screen.



     
  4. Use imageimage to adjust the upper thread tension.
    image : Tighten the upper thread tension.
    image : Loosen the upper thread tension.
    image



     
  5.   Press [OK] .

▲TOP

 

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

Innov-is BP3600, Innov-is BP3700

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.