Innov-is XV
 |
FAQs & Troubleshooting |
How do I specify the embroidering location with the sensor pen?
(Specifying the embroidery pattern location by selecting the pattern center with the sensor pen.)
By using the sensor pen, the embroidering position can be adjusted to the desired location.
Normally, you will take the easy way to select the pattern center for specifying the embroidery location.
However, you have the option of taking the way to select the pattern edge for that.
It is useful in case of placing the name along a line.
If you want to specify the embroidery location at the pattern edge, refer to the procedure specifying the location by selecting the pattern edge with the sensor pen. >>> Click here
Procedure for specifying the embroidery pattern location by selecting the Embroidering Position by the Pattern Center
-
Turn the main power to ON.
If the message “The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage.” appears during the operation, ensure safety, and then press " OK ".
-
Press OK key.
The carriage will move to the initialization position.
-
Press EMBROIDERY key.
* Refer to "SELECTING PATTERNS" on the operation manual.
-
Hoop the fabric and attach the embroidery frame to the machine.
* Refer to "PREPARING THE FABRIC" and "ATTACHING THE EMBROIDERY FRAME" on the operation manual.
-
Press Edit key, and then
(Sensor function key).
-
Press OK key.
* The message in the screen may vary depending on the embroidery pattern.
-
The embroidering position selection screen appears.
-
Select the reference point for positioning the embroidery pattern.
To align the edge of the embroidery with a pattern or mark on the fabric, select the edge of design. If the center of the pattern to be embroidered is determined, select the center position.
-
Press OK key in the following screen.
-
With the sensor pen, touch the point on the fabric corresponding to center
in the screen to set the center of the pattern.
( A ) Center line of the pattern
( B ) Pattern position
Center point of the pattern
→ Specified point number turns into red.
If you touch the invalid area of sewing with the sensor pen, the following message appears.
Press CLOSE key and touch the point again within the sewing area with the sensor pen.
-
With the sensor pen, touch the point on the fabric corresponding to the number
in the screen to set the angle of the pattern.
( A ) Center line of the pattern
( B ) Pattern position
Point on the center line of the pattern to upper direction→ Specified point number turns into red.
-
Press
(Position adjustment key) to adjust the positions.
If you don't need to adjust the positions, press OK key and continue to step 17.
-
Press OK key.
-
Press
to move the LED pointer on the fabric for adjusting the first position.
-
Press OK key to apply the setting.
-
Press to move the LED pointer on the fabric for adjusting the second position.
-
Press OK key to apply the setting.
-
Press OK key.
If the specified pattern position extends out of the pattern area, the following message appears instead of above message. Press CLOSE key and specify the pattern position again within the embroidery field.
-
The preview in the sewing screen is updated according to the specified embroidering position.
-
Press the "Start/Stop" button to start embroidering.
When using the sensor pen to specify the embroidering position, it may not be possible to exactly specify the desired location. In this case, move the embroidery frame to align the center of the pattern with the location indicated by the LED pointer.
