Innov-is BP3600
FAQs & Troubleshooting |
How do I attach or remove the embroidery frame ?
Wind embroidery bobbin thread and insert the bobbin before attaching the embroidery frame.
Check that there is enough thread in the bobbin.
Attaching the Embroidery Frame
-
Press the Presser Foot Lifter button to raise the presser foot.
-
Align the embroidery frame guide with the right edge of the embroidery frame holder.
(1) Embroidery frame holder
(2) Embroidery frame guide
-
Slide the embroidery frame into the holder, making sure to align the embroidery frame’s with the holder’s .
(1) Arrow mark
-
Lower the frame-securing lever to be level with the frame to secure the embroidery frame in the embroidery frame holder.
(1) Frame-securing lever If the frame-securing lever is not lowered, the message Make sure embroidery frame is moved as far back as possible. LOCK DOWN THE FRAME-SECURING LEVER. appears. You cannot start embroidering until you lower the framesecuring lever.
Removing the Embroidery Frame
-
Press the Presser Foot Lifter button to raise the presser foot.
-
Raise the frame-securing lever.
-
Pull the embroidery frame toward you.
Content Feedback
To help us improve our support, please provide your feedback below.