JS1410

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 20/11/2012
  • ID: faqh00000025_000

The thread tension is incorrect.

There could be several reasons why the tension won't set on the machine.
  • Check the machine is threaded correctly. Rethread the machine according to the instructions in the manual.
    Refer to "Upper threading" of  "Preparation" category.

  • Check the upper thread tension set.

  • Remove the bobbin and make sure it is threaded properly in the shuttle race.
    Refer to "Correctly installing a bobbin. " of  "Preparation" category.

  • If there is any loose thread or lint in the bobbin case, please clean them with the included cleaning brush.
    Refer to "Cleaning the Bobbin Case"  of  "General Information" category.

  • Check if the combination of needle size, thread size and fabric is incorrect. Be sure to use the correct needle and thread size for the fabric you are sewing.
    (Example: Denim-size 16 needle and 40-50 heavy duty thread)
    Refer to " Combination of fabric, thread and needle " of  "General Information" category.

Related FAQs

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

AS1430S, FS155, FS70, GS2700, GS3700, Innov-is 1200, Innov-is 1500D/1500, Innov-is 15P, Innov-is 400, Innov-is 4000D/4000, Innov-is 55P, Innov-is 980K, Innov-is I / Innov-is 6000D, Innov-is Ie, Innov-is V7, JS1410, LS-2125/2160, LX27NT, NX-400Q/400, PQ-1500/1500S, PS-53/55/57, XT37

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit