HL-5450DN

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 16/11/2022
  • ID: faq00100692_000

Paper size settings are unavailable when I print from OpenOffice (Linux)

  1. Add "" after each PageSize line in /etc/cups/ppd/[model name].ppd.

    Examples:
    *OpenUI *PageSize: PickOne
    *OrderDependency: 30 AnySetup *PageSize
    *DefaultPageSize: A4
    *PageSize Letter/Letter: "                    "
    *PageSize Legal/Legal: "                    "
    *PageSize Executive/Executive: "                    "
    *PageSize A4/A4: "                    "
    *PageSize A5/A5: "                    "
    *PageSize A6/A6: "                    "
    *PageSize Env10/Com-10: "                    "
    *PageSize EnvMonarch/Monarch: "                    "
    *PageSize EnvDL/DL: "                    "
    *PageSize EnvC5/C5: "                    "
    *PageSize EnvISOB5/B5: "                    "
    *PageSize EnvISOB6/B6: "                    "
    *CloseUI: *PageSize

     

  2. Restart CUPS.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-135C, DCP-145C, DCP-165C, DCP-350C, DCP-385C, DCP-560CN, DCP-585CW, DCP-6690CW, DCP-7010, DCP-7010L, DCP-7025, DCP-7030, DCP-7055, DCP-7065DN, DCP-8060, DCP-8065DN, DCP-8070D, DCP-9040CN, FAX-2840, FAX-2920, HL-2030, HL-2040, HL-2070N, HL-2130, HL-2140, HL-2150N, HL-2240D, HL-2270DW, HL-4040CN, HL-4050CDN, HL-5240, HL-5240L, HL-5250DN, HL-5270DN, HL-5340D, HL-5350DN, HL-5380DN, HL-5440D, HL-5450DN, HL-6050DN, HL-6180DW, HL-7050, HL-8050N, MFC-235C, MFC-250C, MFC-465CN, MFC-490CW, MFC-5860CN, MFC-6490CW, MFC-7360, MFC-7420, MFC-7440N, MFC-7820N, MFC-7860DW, MFC-8220, MFC-8370DN, MFC-8380DN, MFC-8460N, MFC-8510DN, MFC-8860DN, MFC-8880DN, MFC-8910DW, MFC-8950DW, MFC-9440CN, MFC-9840CDW, MFC-990CW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit