HL-2140

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 24/01/2019
  • ID: faq00100599_000

All print jobs are aborted and nothing is printed. (Linux)

  • The drivers for your machine may not installed properly, try to create a temporary symbolic link to link the file "/etc/init.d/cups" or "/etc/init.d/cupsys" to "/etc/init.d/lpd" and install the drivers again.

    For rpm users:
    ln -s /etc/init.d/cups /etc/init.d/lpd
    ln -s /etc/init.d/cupsys /etc/init.d/lpd

    For dpkg users:
    ln -s /etc/init.d/cupsys /etc/init.d/lpd
     
  • If SELinux is working on your system, some configuration for SELinux is required.
    Set your SELinux "permissive" or refer the FAQ for SELinux.
    > Click here to print using CUPS while keeping SELinux enabled.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-135C, DCP-145C, DCP-165C, DCP-350C, DCP-385C, DCP-560CN, DCP-585CW, DCP-6690CW, DCP-7010, DCP-7010L, DCP-7025, DCP-7030, DCP-7055, DCP-7065DN, DCP-8060, DCP-8065DN, DCP-8070D, DCP-9040CN, FAX-2840, FAX-2920, HL-2030, HL-2040, HL-2070N, HL-2130, HL-2140, HL-2150N, HL-2240D, HL-2270DW, HL-4040CN, HL-4050CDN, HL-5240, HL-5240L, HL-5250DN, HL-5270DN, HL-5340D, HL-5350DN, HL-5380DN, HL-5440D, HL-5450DN, HL-6050DN, HL-6180DW, HL-7050, HL-8050N, MFC-235C, MFC-250C, MFC-465CN, MFC-490CW, MFC-5860CN, MFC-6490CW, MFC-7360, MFC-7420, MFC-7440N, MFC-7820N, MFC-7860DW, MFC-8220, MFC-8370DN, MFC-8380DN, MFC-8460N, MFC-8510DN, MFC-8860DN, MFC-8880DN, MFC-8910DW, MFC-8950DW, MFC-9440CN, MFC-9840CDW, MFC-990CW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit