DCP-T310

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 26/04/2018
  • ID: faq00002699_503

Copy a Document

DCP-T310/DCP-T510W/DCP-T710W/MFC-T810W

  1. Make sure you have loaded the correct size paper in the paper tray.
  2. Load your document.
  3. (MFC-T810W) Press (COPY).
    The LCD displays:
  4. Enter the number of copies in one of the following ways:
    • (DCP-T310) Press Number of Copies repeatedly.
    • (DCP-T510W/DCP-T710W) Press or on the control panel.
    • (MFC-T810W) Enter the number of copies using the dial pad.
  5. Change the copy settings, if needed.
    1. Press Options or Copy / Scan Options on the control panel.
    2. Press or to select the copy settings. When the setting you want appears, press OK.
  6. When finished, press Mono Start or Colour Start.
To stop copying, press Stop/Exit.

MFC-T910DW

  1. Make sure you have loaded the correct size paper in the paper tray.
  2. Load your document.
  3. Press (COPY).
    The LCD displays:
  4. Enter the number of copies using the dial pad.
  5. Change the copy settings, if needed.

    Press or to scroll through the copy settings. When the setting you want is highlighted, press OK.

    • When you load paper other than A4 size Plain Paper, you must change the [Paper Size] and [Paper Type] settings.
  6. When finished, press Mono Start or Colour Start.
To stop copying, press Stop/Exit.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-T310, DCP-T510W, DCP-T710W, MFC-T910DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit