DCP-T820DW

FAQs & Troubleshooting

FAQs & Troubleshooting

After replacement or repair of the Brother machine, uneven color streaks stand out when printing from the computer. (Windows)

This product optimizes printing based on the information stored in the printer driver on the computer connected to your Brother machine.

 

When you replaced or repaired your machine, or the IP address of a printer driver is changed to another Brother machine, you need to update the product information in the printer driver manually.

If you print without updating the information in the printer driver, uneven color streaks may occurs since printing is performed based on the old information stored in the printer driver.

 

To resolve this issue, update the information in the printer driver installed in the computer.

 

  1. Connect your Brother machine to your computer with USB, wired LAN or wireless LAN.
    Confirm that connection status of your Brother machine is ready.
     
  2. Open Printing Preferences. (Click here to see the details of how to open Printing Preferences.)
     
  3. Click the Advanced tab and click Other Print Options.
     

    Other Print Options

     

  4. Click Retrieve Printer's Color Data in Printer Function on the left and confirm the Use Printer's Color Data check box is checked, then click Retrieve Printer's Color Data.
     

    image for step4

     

  5. Click OK and wait for a while.
     

    image for step5

     

     

    image for step5

     

  6. When the screen below appears, click OK to finish. Retrieving Printer's color data is now completed.
     

    image for step6

 

  • If an error message stating "Communication with your device failed", please confirm that your machine and computer are connected correctly, and then repeat the procedures.
  • This procedure does not need to be performed multiple times on the same computer. The data is saved into the computer if it is completed once.
  • If your machine connects to several computers, perform this procedure for each computer.
  • If you use your Brother machine in a Network Shared environment, this procedure can only be executed on the Server PC. The procedure does not need to be performed on the Client PC.
 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-T220, DCP-T226, DCP-T420W, DCP-T426W, DCP-T520W, DCP-T720DW, DCP-T820DW, MFC-T920DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.