PT-D460BT

FAQs & Troubleshooting

FAQs & Troubleshooting

When the label is printed, there is too much margin on both sides of the text.

Due to the construction of the tape mechanism, there is no way to print without excess tape before the first label.

However, when you print more than one label continuously, the subsequent labels can be printed without the excess tape.

The following methods are useful for reducing tape use:
 

> When printing a single label
> When printing multiple labels
 

When printing a single label

  1. Press the [Label] key ( Label / Label )/[Function] key ( Function ).
  2. Press Up or Down to display [Cut Option], and then press the [OK] key or [Enter] key ( Enter / Enter ).
  3. Press Up or Down to display [Small Margin], and then press the [OK] key or [Enter] key.

 

When printing multiple labels

To reduce the margin size of the second and subsequent labels, print multiple labels consecutively using either the same or different layout for the labels.
 

Using the same layout for multiple labels

To feed the tape correctly, the printer will automatically set a wider left margin for the first label only. The second and subsequent labels will have small margins.
same

  1. Press the [Label] key ( Label / Label )/[Function] key ( Function ).
  2. Press Up or Down to display [Cut Option], and then press the [OK] key or [Enter] key ( Enter / Enter ).
  3. Press Up or Down to display [Chain], and then press the [OK] key or [Enter] key.
  4. Enter the text.
  5. Press the [Print] key ( Print / Print ). [Copies] appears.
  6. Press Up or Down to select your desired number of copies (1 - 9).
  7. Press the [Print] key.
  8. When the message [OK to Feed?] appears after the last label is printed, be sure to press the [OK] key or [Enter] key.

    When [Chain] is set, feed the tape before using the cutter otherwise a part of the text may be cut off.
     Be sure to feed the tape before cutting the tape.

  9.  After the tape is fed, press the cutter lever to cut off the chain of labels.
Using different layouts for multiple labels

To feed the tape correctly, the printer will automatically set a wider left margin for the first label only. The second and subsequent labels will have small margins.
different

  1. Press the [Label] key ( Label / Label )/[Function] key ( Function ).
  2. Press Up or Down to display [Cut Option], and then press the [OK] key or [Enter] key ( Enter / Enter ).
  3. Press Up or Down to display [Chain], and then press the [OK] key or [Enter] key.
  4. Enter the text.
  5. Press the [Print] key ( Print / Print ). [Copies] appears.
  6. Press Up or Down to select your desired number of copies (1 - 9).
  7. Press the [OK] key or [Enter] key. The message [OK to Feed?] appears.
  8. Press the [Escape] key ( Escape ) to edit the next label.
  9. Clear the text, and enter the text for the next label.
  10. Repeat step d to h until all labels have been created, and then press the [Print] key.
  11. When the message [OK to Feed?] appears after the last label is printed, be sure to press the [OK] key or [Enter] key.

    When [Chain] is set, feed the tape before using the cutter otherwise a part of the text may be cut off.

    Be sure to feed the tape before cutting the tape.

  12. After the tape is fed, press the cutter lever to cut off the chain of labels.

 

If your question was not answered, have you checked other FAQs?

Have you checked manuals?

If you need further assistance, please contact Brother customer service:

Related Models

PT-D460BT, PT-D610BT

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.