PR1X

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 22/08/2016
  • ID: faqh00100439_000

Stitches are skipped.

There could be several reasons why stitches are skipped.
Check the following points or issues.

 

  • The upper thread is not threaded correctly.
    Thread the upper thread correctly.

    For details, see "How do I thread the machine? (Threading the upper thread)" .
     

  • The needle is bent or blunt.
    Replace the needle with a new one.
     
  • The needle is not installed correctly.
    Correctly install the needle.
     
  • Dust has accumulated under the needle plate or in the hook.
    Clean the hook and the needle plate.

    For details, see
    "Maintenance (Clean the hook) " 
    "Maintenance (Cleaning around the needle plate) " .
     

  • The needle and the hook are not correctly passing each other.
    Consult your nearest authorized Brother dealer.
     
  • The thread twist is either too tight or too loose.
    Improper twisting results in irregular loop formation. Try using a new spool.
     

 

Related FAQs

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

PR1050X, PR1X, VR

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit