MFC-J6510DW

FAQs & Troubleshooting

FAQs & Troubleshooting

I am unable to change my Brother machine's Receive Mode.

If you want to know which Receive Mode to choose, please see the Related FAQ's: "How do I know which receive mode to select?"


If you cannot change the Receive Mode, Distinctive Ring, BT Call Sign or FaxAbility is currently on.


STEP I : Turning off Distinctive Ring, BT Call Sign or FaxAbility

Follow these steps to turn Distinctive Ring, BT Call Sign or FaxAbility off:

*If your Brother machine has a touchscreen, please follow the steps under "For touchscreen models" below.


  1. Press the MENU key.

  2. Press the UP OR DOWN ARROW key to choose Fax.

  3. Press the OK key.

  4. Press the UP OR DOWN ARROW key to choose Miscellaneous.

  5. Press the OK key.

  6. Press the UP OR DOWN ARROW key to choose Distinctive, Faxability or BT Call Sign.

  7. Press the LEFT OR RIGHT ARROW key to choose Off.

  8. Press the OK key.

  9. Press the STOP/EXIT key.

  10. Please go to STEP II to change the Brother machine's Receive Mode.

<For touchscreen models>

  1. Press Menu on the screen.

  2. Press the UP OR DOWN ARROW to display Fax.

  3. Press Fax.

  4. Press the UP OR DOWN ARROW to display Miscellaneous.

  5. Press Miscellaneous.

  6. Press the UP OR DOWN ARROW to display Distinctive, FaxAbility or BT Call Sign.

  7. Press Distinctive, FaxAbility or BT Call Sign.

  8. Press Off.

  9. Press the STOP/EXIT key.

STEP II : Changeing the Brother machine's Receive Mode

You should now be able to change the Receive Mode by following these steps:

*If your Brother machine has a touchscreen, please follow the steps under "For touchscreen models" below.

  1. Press the MENU key.

  2. Press the UP OR DOWN ARROW key to choose Initial Setup.

  3. Press the OK key.

  4. Press the UP OR DOWN ARROW key to choose Receive Mode.

  5. Press the LEFT OR RIGHT ARROW key to choose Fax Only, Fax/Tel, External TAD, or Manual.

  6. Press the OK key.

  7. Press the STOP/EXIT key.

<For touchscreen models>

  1. Press MENU on the screen.

  2. Press the UP OR DOWN ARROW to display Initial Setup.

  3. Press Initial Setup.

  4. Press the UP OR DOWN ARROW to display Receive Mode.

  5. Press Receive Mode.

  6. Press Fax Only, Fax/Tel, External TAD (For some models), or Manual.

  7. Press the STOP/EXIT key.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

MFC-9970CDW, MFC-J615W, MFC-J6510DW, MFC-J6710DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.