DCP-L5510DN

FAQs & Troubleshooting

Toner specks

Check the following points to resolve the issue:

Make sure the media type setting in the driver matches the type of paper you are using.
Clean the drum unit.
> Click here to see how to clean the drum unit.
The toner cartridge may be damaged. Replace the toner cartridge with a new toner cartridge.
> Click here to see how to replace the toner cartridge.
The drum unit may be damaged. Replace the drum unit with a new drum unit.
> Click here to see how to replace the drum unit.
The fuser unit may be contaminated. Contact Brother Customer Service from "Contact Us".

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

Go to the Manuals section

If you need further assistance, please contact Brother customer service:

Go to the Contact Us section

Related Models

DCP-B7620DW(B), DCP-B7640DW(B), DCP-L5510DN, HL-B2100D(B), HL-B2180DW(B), HL-L5210DN, HL-L5210DW, HL-L6210DW, HL-L6415DW, MFC-B7810DW(B), MFC-L5710DN, MFC-L5915DW, MFC-L6915DW

Content Feedback

To help us improve our support, please provide your feedback below.

FAQs & Troubleshooting

Toner specks

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

Content Feedback

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Support & Downloads

DCP-L5510DN

Vietnam(English)