HL-4050CDN

FAQs & Troubleshooting

FAQs & Troubleshooting

What kind of memory can I use?

The printer has 64 MB of standard memory and one slot for optional memory expansion. You can expand the memory up to 576 MB by installing a Dual In-line Memory Module (SO-DIMM).

In general, the machine uses industry-standard SO-DIMM with the following specifications:

  • Type: 144 pin and 64 bit output
  • CAS Latency: 2
  • Clock frequency: 100 MHz or more
  • Capacity: 64, 128, 256 or 512 MB
  • Height: 31.75 mm (1.25 in.)
  • SDRAM can be used.

  • There might be some SO-DIMMs that will not work with the printer.
  • For more information, call the dealer you bought the printer from or contact Brother Customer Service from "Contact Us".

This type of memory SO-DIMM is available from most major memory suppliers.

    If your question was not answered, have you checked other FAQs?

    Have you checked the manuals?

    If you need further assistance, please contact Brother customer service:

    Related Models

    HL-3070CW, HL-4040CDN, HL-4050CDN

    Content Feedback

    To help us improve our support, please provide your feedback below.

    Step 1: How does the information on this page help you?

    Step 2: Are there any comments you would like to add?

    Please note this form is used for feedback only.