Model discontinued. This page is no longer updated.

MFC-8460N

FAQs & Troubleshooting

FAQs & Troubleshooting

When receiving a 1 page fax, why does the fax print on 2 pages or a blank sheet ejects afterwards?

If the received data is divided and printed on 2 pages or if you get an additional blank page, your Paper Size setting and/or the Reduction setting may not be correct for the paper you are using.


Adjust the paper size following the instructions listed below:


  1. Press Menu.
  2. Press the up or down navigation key until General Setup appears on the LCD and press OK.
  3. Press the up or down navigation key until Paper Size appears and press OK.
  4. Press the up or down navigation key to choose Tray#1.
  5. Press OK.
  6. Press the up or down navigation key until the paper size you are using appears and then press OK.
  7. Press Stop/Exit.

  • To set the paper size for the MP Tray, choose MP Tray in STEP 4.
    If you installed the optional tray, choose Tray#2 in STEP 4 to set the paper size for the optional tray.

If you are using the fixed reduction feature, check to see if the reduction ratio is set to ON. (We recommend turning the setting to "Auto Reduction" ON.) 

To check the reduction setting:

  1. If the FAX mode key is not illuminated in blue, press it.
  2. Press Menu.
  3. Press the the up or down navigation key until Fax appears on the LCD and press OK.
  4. Press the up or down navigation key until Setup Receive appears and press OK.
  5. Press the up or down navigation key until Auto Reduction appears and press OK.
  6. Press the up or down navigation key until ON (or OFF) appears and press OK.
  7. Press Stop/Exit.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

MFC-8460N, MFC-8860DN

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.