PJ-883

FAQs & Troubleshooting

FAQs & Troubleshooting

How do I connect my computer to the printer using the Wireless Direct mode?

For Windows :

  1. Download Software/Document Installer from the [Downloads] section of this website and then start the installer. P-touch Editor, Printer Setting Tool, and other software are installed in addition to the printer driver.

  2. When the dialog box for selecting the connection method is displayed after the printer driver installation starts, select [Local Connection (USB)].
    Click [Next], and then follow the installer instructions.
    Screen

  3. When the installation is finished, press the Bluetooth and Wi-Fi button ( Bluetooth/Wi-Fi ) to enable the Bluetooth and Wi-Fi function of the printer.

  4. Change the settings of the printer.
    Start the Printer Setting Tool on your computer, and click [Communication Settings]. Confirm the SSID (Network Name) and password (Network Key) in the [Wireless Direct] tab, and then select [Wireless Direct] for [Selected Interface] in [Communication Settings] in the [General] tab.
    Screen

  5. From your computer, select the SSID you confirmed in step 4 and connect to the printer.
    Screen
    • The factory setting for the SSID is "DIRECT-[the last five digits of the product serial number]_PJ-883".
    • If you are prompted to enter a password, enter the password (Network Key) you confirmed in step 4.
    • For Windows 10 or later, check [Connect automatically].
    • It may take several minutes until the connection is finished.

  6. Start the Printer Setting Tool on your computer again, and click [Communication Settings].
    Confirm the IP address in [Current Status] in the [Wireless Direct] tab.
    Screen

  7. Open the [Devices and Printers] window. (For more information about opening the window, click here.)
    Click [Add a printer].

    For Windows 8.1 or later:
    Click [The printer that I want isn't listed] on the bottom of the window instead of selecting the displayed printer icon for PJ-883.
    Add a device

  8. For Windows 8 or later:
    Select [Add a local printer or network printer with manual settings], and then click [Next].

    For Windows 7 or earlier:
    Click [Add a local printer].

  9. Select [Create a new port] - [Standard TCP/IP Port], and then click [Next].

  10. Enter the IP address you confirmed in step 6, and then click [Next]. The computer will start searching for the TCP/IP port.

  11. When the dialog box with [Which version of the driver do you want to use?] appears, select [Use the driver that is currently installed (recommended)], and then click [Next]. Confirm the printer name, and then click [Next]. You have finished connecting your computer to the printer.

  12. Open the [Devices and Printers] window again, click the [Ports] tab in the [Printer Properties] dialog box, confirm that the IP address for the printer is the same as the address you confirmed in step 6 and that the [Standard TCP/IP Port] option (not WSD port) is selected.

  13. Start P-touch Editor to create and print labels.

 

For Mac:

  1. Download the Printer Driver from the [Downloads] section of this website, double-click the file, and then follow the on-screen instructions.
    Screen

  2. When the installation is finished, press the Bluetooth and Wi-Fi button ( Bluetooth/Wi-Fi ) to enable the Bluetooth and Wi-Fi function of the printer.
     
  3. Change the settings of the printer.
    Connect the printer and computer using a USB cable. Start the Printer Setting Tool from the computer, set [WirelessDirect] to [On] in the [Wireless LAN] tab, and confirm the SSID (Network Name) and password (Network Key).
    Screen

  4. From your computer, select the SSID you confirmed in step 3 and connect to the printer.
    SSID
    • The factory setting for the SSID is "DIRECT-[the last five digits of the product serial number]_PJ-883".
    • If you are prompted to enter a password, enter the password (Network Key) you confirmed in step 3.
    • It may take several minutes until the connection is finished.

  5. Add the printer in the operating system.
    From the Apple menu, open [System Settings]/[System Preferences] - [Printers & Scanners], and then click [Add Printer, Scanner, or Fax] or the [+] button.

  6. Select the printer you want to use from the [Name] list, and then select "[model name] + CUPS" from the [Use] list.
     
  7. Click [Add].

  8. Start P-touch Editor to create and print labels.

If your question was not answered, have you checked other FAQs?

Have you checked manuals?

If you need further assistance, please contact Brother customer service:

Related Models

PJ-883

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.