PJ-662

FAQs & Troubleshooting

FAQs & Troubleshooting

How to charge the rechargeable Ni-MH battery

Perform the following procedure to charge the rechargeable Ni-MH battery.

  • Charge the rechargeable Ni-MH battery immediately after purchase using the following procedure.
  • Up to 120 minutes is needed to fully charge a rechargeable Ni-MH battery. About 70 pages can be printed when using a new, fully-charged rechargeable Ni-MH battery.
  1. Install the rechargeable Ni-MH battery in the printer.

  2. Use the AC adapter and AC power cord to connect the printer to an AC power outlet, or use the DC cable to connect the printer to a DC power outlet.

  3. Make sure that the printer is turned off.

  4. Press and hold the Power (Power) button for a few seconds until the POWER indicator begins to blink in green and orange.
    • While the POWER indicator is blinking in green and orange, the battery is being refreshed.
    • The rechargeable Ni-MH battery may be charged without being refreshed, determining how frequently the Ni-MH battery is refreshed in the setting in PJ-600 Series Utility. You can download and install it in the download page.
    • If there is still a considerable amount of charge in the rechargeable Ni-MH battery, it may not be refreshed.
    • While the rechargeable Ni-MH battery is being refreshed, press and hold thePower (Power) button to stop refreshing the battery and begin charging it.

  5. After the rechargeable Ni-MH battery has been refreshed, charging begins automatically.
    The POWER indicator blinks in green until charging is complete.
    When charging is complete, the POWER indicator turns off.
     

Stopping rechargeable Ni-MH battery charging

To stop rechargeable Ni-MH battery from charging, press the Power (Power) button quickly two times.

If your question was not answered, have you checked other FAQs?

Have you checked manuals?

If you need further assistance, please contact Brother customer service:

Related Models

PJ-622, PJ-623, PJ-662, PJ-663

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: €Are there any comments you would like to add?

Please note this form is used for feedback only.