HL-S7000DN

FAQs & Troubleshooting

FAQs & Troubleshooting

Enable the Brother machine's network interface.

Follow the steps below to enable or disable the Brother machine's network interface (wired LAN or wireless LAN).

A wired and a wireless network connection cannot be used at the same time. Enable the network connection type you want to use and then disable the other.

  1. Press Menu.
  2. Press the Up or Down arrow key to select Network. Press OK.
  3. Press the Up or Down arrow key to select Wired LAN or WLAN. Press OK.
  4. Press the Up or Down arrow key to select Wired Enable or WLAN Enable. Press OK.
  5. Press the Up or Down arrow key to select On or Off.
  6. Press OK.
  7. Press Stop/Exit or Cancel.

(For wireless network users)
If you want to set up your Brother machine on a wireless network, see the following FAQ.
> Click here to see how to set up your Brother machine on a wireless network.

If your Brother machine still having an issue over the network feature, see the Related FAQs at the end of the page.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-1617NW, DCP-L2540DW, DCP-L2550DW, DCP-L3551CDW, HL-2280DW, HL-S7000DN, MFC-7860DW, MFC-8690DW, MFC-8710DW, MFC-8712DW, MFC-8810DW, MFC-8890DW, MFC-8910DW, MFC-8912DW, MFC-9320CW, MFC-9325CW, MFC-9560CDW, MFC-L2700DW, MFC-L2705DW, MFC-L2707DW, MFC-L2710DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.