ES-2000/2000T

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 04/07/2009
  • ID: faqh00000002_000

How do I correctly install a bobbin?


  1. Make sure bobbin thread unrolls in the correct direction when installing the bobbin into bobbin case.
    installing the bobbin into bobbin case

    • Be sure to set a bobbin so that thread unrolls in the correct direction.
      If the thread unrolls in the wrong direction, the needle may break or the thread tension will be incorrect.
      Be sure to set a bobbin
    • Use a bobbin that has been correctly wound with thread.
      Otherwise, the needle may break or the thread tension will be incorrect.
      Wound evenly
      Wound evenly            Wound poorly

  2. Be sure to insert the thread through the tension-adjusting spring of the bobbin case.
    In step 3 and 4 below, a hint for inserting thread through tension-adjusting spring and how to check if it's properly inserted will be described.
    Tension-adjusting spring 1 Tension-adjusting spring

    • When embroidering
      surface of fabric
      surface of fabric      		 underside of fabric
      underside of fabric      		 As shown in the left pictures, only a bobbin thread appears on both sides of fabric if the thread is not inserted through the tension-adjusting spring.
    • When utility stitch sewing
      Locks appear on the surface of fabric 1 Surface  2 Upper thread
      3 Bobbin thread
      4 Locks appear on the surface of fabric
      Locks appear on the surface of fabric as the above illustration, if the thread is not inserted through the tension-adjusting spring.

  3. In case of a machine equipped with Quick-set bobbin (needle plate with a cutter for bobbin thread), lightly hold down a bobbin with your finger and cut the thread with the cutter when installing a bobbin into a bobbin case so that the thread can be inserted through the tension-adjusting spring surely.
    cut the thread with the cutter 1 Cutter

    the thread is surely inserted through the tension-adjusting spring
    You will feel some resistance when pulling the thread toward the blue arrow direction, if the thread is surely inserted through the tension-adjusting spring.
    However, you will be able to pull the thread easily without any resistance or friction, if thread is not inserted through the tension-adjusting spring.

  4. If thread is inserted through the tension-adjusting spring surely, the bobbin thread passes over the bobbin when it is pulled up, as shown in the below illustration.
    thread is inserted through the tension-adjusting spring surely 1 Upper thread

    2 Bobbin thread
    If the bobbin thread does not pass over the bobbin, the thread may not be inserted through the tension-adjusting spring. In this case, reinstall the bobbin.
    the bobbin thread does not pass over the bobbin 1 Upper thread

    2 Bobbin thread

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

BM-2700, BM-3600, BX2925PRW, CE1125PRW, CE-5000/5000PRW, CP2410, CS-100T/4000/5000H, CS-6000/6000b/6000t/6000i, CS7000i, CS7130, CS7205, CS-80, CS-8060, CS-8072, CS-8150, CS9100, DZ2400, DZ2750, DZ3000, DZ3400, DZ820E, ES-2000/2000T, EX-660, HC7140, HE1, HE-120, HE-240, HE300, HS-2000, HS-3000, Innov-is 1000, Innov-is 1200, Innov-is 1250D, Innov-is 1500D/1500, Innov-is 2500D, Innov-is 2800D, Innov-is 40, Innov-is 4000D/4000, Innov-is 40e, Innov-is 4500D, Innov-is 4750D, Innov-is 500D, Innov-is 6000D, Innov-is 6700D, Innov-is 6750D, Innov-is 80, Innov-is 85e, Innov-is 900D, Innov-is 950D, Innov-is 990D, LB6770/6770PRW, LB-6800, LB6810, LS-590, NX-200, NX-250, NX-400Q/400, NX-450/450Q, NX570Q, NX-600, NX-650Q, PC-210/210PRW, PC-420/420PRW, PC-6500, PC-8500/8500D, PE-150V, PE-170D, PE-180D, PE-300S, PE-430, PE-450, PE500, PE525, PE540D, PE-700/750D, PE-700II/750D(USB), PE-770, PE-780D, PS300T, PS-3100/3700, QB9110L, QC-1000, SB1000T, SB3129, SB4138, SB700T, SB7050E, SB7500, SB8000, SC3000, SC6600, SC9500, SE1800, SE-270D, SE-350, SE-400, SE425, SM8270, SQ-9000, SQ9050, SQ9100, SQ9130, SQ9185, SQ9285, SQ9310, ST150HDH, ULT2001/2001N/2001C/2002D/2003D, XL-2600/2600i/2610, XL-3500/ t/ i/3510/3520, XL-3750, XL-6452, XL-6562, XR3140, XR3240, XR3340, XR-52C, XR-65T, XR-7700, XR-9000, XR9500PRW, XR9550/XR9550PRW, XS2070, XS2080, XS2100, XS3109

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit