CE1155
 |
FAQs & Troubleshooting |
How do I change the needle stop position?
You can change the needle stop position to either the lowered (in the fabric) or raised position.
(Default: Lowered position)
-
Turn off the machine.
-
Holding down
(the minus key for the tens digit of the stitch number selection), turn on the machine.
-
After the machine has turned on, release .
The needle stop position is changed.
| Viewing the LCD |
The needle stop position is set to "Lowered position" |
The needle stop position is set to "Raised position" |
| When the single needle mode is set |
 |
 |
| When the twin needle mode is set |
 |
 |
The settings are stored even when the power switch is turned off.
If your question was not answered, have you checked other FAQs?
Have you checked the manuals?
If you need further assistance, please contact Brother customer service:
Related Models
CE1010, CE1150, CE1155, CE6080T, CE6085T, CE7700, CP100X, CP2160F, CP2160L, CP2160M, CP2160P, CP2160R, CP2160W, CP60X, CP80X, CS5055, CS6000XL, CS7000X, ND50E, SH7700, XS6070
Content Feedback
To help us improve our support, please provide your feedback below.
