TP-M5000N

FAQs & Troubleshooting

FAQs & Troubleshooting

What maintenance should be performed?

Perform machine maintenance as required.

Some environments require that maintenance must be done more frequently (for example, if the machine is located in dusty conditions).

Before performing machine maintenance, turn off the machine, and then unplug the power cord from the power outlet.

> Print head maintenance

> Ink ribbon guide roller maintenance

> Platen roller maintenance

> Bottom cover maintenance

> Paper core holder maintenance

 

Print head maintenance

  • Immediately after printing, the print head will be hot. Be careful not to be burned.
  • Do not directly touch the print head with your fingers.
  1. Press the open button to open the top cover.

  2. Lift up the protective cover (1), and then lightly wipe the print head (2) with the cleaning pen.
    Wipe print head

    When printing stops in cooling mode, do not open the top cover or bottom cover, otherwise printing will not resume.

    About cooling mode:

    If the print head becomes too hot, printing will stop so that the print head can cool down, while the power indicator blinks once every second in orange. At that time, an extra vertical line will be printed on the tape or fabric ribbon. After cooling, printing will resume.

    This may occur when printing a high volume of text with a high print density.

    To avoid or delay the onset of this condition, edit your design to reduce the detail.

 

Ink ribbon guide roller maintenance
 

  1. Press the open button to open the top cover.

  2. Clean the roller (1) with a cloth slightly moistened with ethanol or isopropyl alcohol.
    Clean ink ribbon guide roller
    Do not use organic solvents such as benzene.

 

Platen roller maintenance

Use a piece of cellophane tape to remove dirt or dust from the surface of the platen roller (1).
Clean platen roller
 

 

Bottom cover maintenance

 

  1. Press the open button to open the bottom cover.

  2. Clean the parts shown in gray in the illustration with a cloth slightly moistened with ethanol or isopropyl alcohol.
    Clean bottom cover

Paper core holder maintenance

 

If tape adhesive accumulates on the inside (1) of the rims for the paper core holder, clean it off.
Clean core holder

  1. Remove the paper core holder from the machine, and then remove the paper core.

  2. Clean with a cloth slightly moistened with ethanol or isopropyl alcohol.

If your question was not answered, have you checked other FAQs?

Have you checked manuals?

If you need further assistance, please contact Brother customer service:

Related Models

TP-M5000N

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.