PJ-883

FAQs & Troubleshooting

FAQs & Troubleshooting

How can I stop the printer from automatically feeding roll paper after printing? (for Mac)

Follow the steps below:

 

  1. Make sure that the printer driver is installed.
    If you have not installed the printer driver, visit the [Downloads] page to download the printer driver.  Double-click the downloaded file, and then follow the on-screen instructions.
     
  2. Open a document that you want to print, and then select [Print] from the [File] menu.
     
  3. Confirm that your printer is selected for [Printer] and the specified paper size and type match the paper that is loaded.
     
  4. In the [Printer Features] menu, select [No Feed/Feed Margin] for [Form Feed Mode].
     
  5. Set [Feed Margin] as needed.
    After the last page of the print job is printed, the paper is fed by the specified amount.

    If [Feed Margin] is set to 0, paper is not fed at the end of a job. If a value is entered for [Feed Margin], paper is fed at the end of the job in the amount of that value. Use this setting when printing on non-perforated roll paper.

     
  6. Click [Print].

If your question was not answered, have you checked other FAQs?

Have you checked manuals?

If you need further assistance, please contact Brother customer service:

Related Models

PJ-822, PJ-823, PJ-862, PJ-863, PJ-883

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.