CP2160W
![FAQs & Troubleshooting FAQs & Troubleshooting](/g/b/shared/img/module/icon_question_33.png) |
FAQs & Troubleshooting |
Machine does not start to sew.
If the machine does not start when you press the Foot controller, check the following possible causes and solutions.
-
The bobbin winder shaft is pushed to the right.
Slide the bobbin winder shaft to the left until it snaps into place.
![img01 img01](/g/b/img/faqend/faqh00101548_004/us_ot/en/2412662/faqh1548_fig0301.gif)
Refer to "How do I wind the bobbin?".
-
Presser foot is not lowered.
Lower the presser foot.
![img02 img02](/g/b/img/faqend/faqh00101548_004/us_ot/en/2412659/faqh1548_fig0302.gif)
Refer to "Basic procedure to sew stitches".
-
The foot controller was pressed with the buttonhole lever is down while a stitch other than a buttonhole stitch or a bar tack stitch is selected.
Raise the buttonhole lever before continuing the operation.
![img03 img03](/g/b/img/faqend/faqh00101548_004/us_ot/en/2412660/faqh1548_fig0303.gif) |
(1) Buttonhole lever |
-
The foot controller was pressed with the buttonhole lever is up while a buttonhole stitch or a bar tack stitch is selected.
Lower the buttonhole lever before continuing the operation.
![img04 img04](/g/b/img/faqend/faqh00101548_004/us_ot/en/2412661/faqh1548_fig0304.gif) |
(1) Buttonhole lever |
If your question was not answered, have you checked other FAQs?
Have you checked the manuals?
If you need further assistance, please contact Brother customer service:
Related Models
CE1010, CE1150, CE6080T, CE6085T, CE7700, CP2160F, CP2160L, CP2160M, CP2160P, CP2160R, CP2160W, CP60X, CP80X, CS5055, SH7700, XS6070
Content Feedback
To help us improve our support, please provide your feedback below.