CV3440

FAQs & Troubleshooting

FAQs & Troubleshooting

How to remove the fabric from the machine when sewing cover stitches.

  1. By hand, turn the handwheel toward you until the needle is at its highest position.
    The mark (A) on the handwheel is aligned with the line (B) on the machine when needles are at their highest position.

    image

     

  2. Raise the presser foot.

    image

     

  3. Slowly pull the fabric in the direction of the arrow.

    image

    Be sure to pull the fabric to the back.

     

  4. Cut the needle threads, which come out from the surface of the fabric.

    image

     

  5. Slowly pull the fabric in the direction of the arrow so that the ends of the needle threads are pulled to the back of fabric.

    image

     

  6. Cut the looper thread.

    image

    We recommend using scissors to cut the looper thread. Scissors can also be used to cut the machine threads.

     

  7. Pull all threads at the back of the fabric. Tie all threads together and cut.

    image

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

CV3440

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.