Innov-is NS2750D

FAQs & Troubleshooting

FAQs & Troubleshooting

How do I remove or attach the Embroidery foot ?

Be sure to use embroidery foot when doing embroidery. Using another presser foot may cause the needle to strike the presser foot, causing the needle to bend or break and possibly cause injury.

 

  1. Pressimage (Needle position button) to raise the needle.

  2. Press image.
    The screen changes, and all keys and operation buttons are locked (except image).


  3. Raise the presser foot lever.

    image (1) Presser foot lever

  4. Press the black button on the presser foot holder to remove the presser foot.
    image (1) Black button

    (2) Presser foot holder

     

  5. Use the included screwdriver to loosen the presser foot holder screw, and then remove the presser foot holder.
    The presser foot holder screw can also be loosened or tightened with the disc-shaped screwdriver.
    (1) Screwdriver

    (2) Presser foot holder

    (3) Presser foot holder screw


  6. Hold the embroidery foot with your right hand, as shown.
    Hold the embroidery foot with your index finger wrapped around the lever at the back of the foot.
    (1) Lever

    (2) Embroidery foot bar


  7. While pressing in the lever with your finger fit the embroidery foot bar over the needle clamp screw and then fit the presser foot holder screw into the presser foot mounting notch to attach the embroidery foot to the presser foot bar.

    (1) Embroidery foot bar

    (2) Needle clamp screw

    (3) Mounting notch


  8. Secure the embroidery foot with the presser foot holder screw.
    Set the embroidery foot perpendicular.
    (1) Presser foot holder screw

  9. Hold the embroidery foot in place with your right hand, and then use the included screwdriver to securely tighten the presser foot holder screw.



     
  10. Press image  to unlock all keys and buttons.

 

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

Innov-is NS2750D, Innov-is NS2850D, SE1900, SE1950, SE2000

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.