CV3440

FAQs & Troubleshooting

FAQs & Troubleshooting

Needles break

Check for the following matters.

 

 

  • Probable cause

    The threading on the machine is improper.

     

    Remedy

    Make sure that the threads are passed into the machine properly.
    Rethread the threads to the machine in an appropriate procedure.

     

    Refer to the detailed instructions to learn the threading procedure.

    Instructions for threading the machine.

    You can also see the instructions for threading on movie.

    Video instructions for threading.

 

 

  • Probable cause

    The needle was bent, or the tip of needle was blunt or broken.

     

    Remedy

    Replace with a new needle.

 

 

  • Probable cause

    Needle is installed incorrectly.

     

    Remedy

    Reinstall needles correctly.
    Make sure that the needle is installed until it touches the needle stopper.

    image

    Refer to the instructions to learn how to replace the needles.

    Instructions for removing and installing the needle

 

 

  • Probable cause

    Wrong needle is used.

     

    Remedy

    Use a standard home sewing machine needle. The recommended needle is Schmetz 130/705H (90 / #14).

 

 

  • Probable cause

    The material was pulled forcibly.

     

    Remedy

    Do not press or pull material too hard when sewing.

 

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

CV3440, CV3550

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.