SB4138

FAQs & Troubleshooting

FAQs & Troubleshooting

The thread tension is incorrect.

There could be several reasons why the tension won't set on the machine.
  • Check the machine is threaded correctly. Rethread the machine according to the instructions in the manual.
    Refer to "Upper threading" of  "Preparation" category.

  • Check the upper thread tension set.

  • Remove the bobbin and make sure it is threaded properly in the shuttle race.
    Refer to "Correctly installing a bobbin. " of  "Preparation" category.

  • If there is any loose thread or lint in the bobbin case, please clean them with the included cleaning brush.
    Refer to "Cleaning the Bobbin Case"  of  "General Information" category.

  • Check if the combination of needle size, thread size and fabric is incorrect. Be sure to use the correct needle and thread size for the fabric you are sewing.
    (Example: Denim-size 16 needle and 40-50 heavy duty thread)
    Refer to " Combination of fabric, thread and needle " of  "General Information" category.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

BB370, BM-2700, BM2800, BM-3600, BM3700, BM3730, BM3850, BX2925PRW, CE1000, CE1008, CE1100PRW, CE1125PRW, CE4400, CE-5000/5000PRW, CE-5500/CE-5500PRW, CE5500T, CE6006, CE6070T, CE7070PRW, CE8080/CE8080PRW, CE8100, CP2410, CP-6500, CP-7500, CS-100T/4000/5000H, CS5055PRW, CS-6000/6000b/6000t/6000i, CS7000i, CS7130, CS7205, CS-80, CS-8060, CS-8072, CS-8150, CS8800PRW, CS9100, DZ1500F, DZ1500FL, DZ2400, DZ2750, DZ3000, DZ3400, ES-2000/2000T, EX-660, GQ3700, GX37, H537ST, HC1850, HC3010, HC7140, HE-120, HE-240, HE300, HS-2000, HS-2500, HS-3000, Innov-is 1000, Innov-is 1200, Innov-is 1250D, Innov-is 1500D/1500, Innov-is 2500D, Innov-is 2800D, Innov-is 40, Innov-is 4000D/4000, Innov-is 40e, Innov-is 4500D, Innov-is 4750D, Innov-is 500D, Innov-is 6000D, Innov-is 6700D, Innov-is 6750D, Innov-is 80, Innov-is 85e, Innov-is 900D, Innov-is 950D, Innov-is 990D, Innov-is BQ2450, Innov-is BQ2500, Innov-is BQ3050, Innov-is BQ3100, Innov-is VM5100, Innov-is VM5200, Innov-is VM6200D, Innov-is VQ2400, Innov-is VQ3000, JX1400, JX1410, JX1710, JX2217, JX2517, LB6770/6770PRW, LB-6800, LB6810, LS-1217, LS-1520, LS-1717, LS-2000, LS-2020, LS-2125/2125i/2129, LS2250PRW, LS2300PRW, LS2350, LS2400, LS-30, LS-590, LX2375, LX2500, LX2763, LX3014, LX-3125/3125E, LX3850, MZ53, NX-200, NX-250, NX-400Q/400, NX-450/450Q, NX570Q, NX-600, NX-650Q, PC-210/210PRW, PC-420/420PRW, PC-6500, PC-8500/8500D, PE-300S, PQ-1500/1500S, PQ1500SL, PQ1600S, PS100, PS200T, PS-21, PS300T, PS-3100/3700, QB9110L, QC-1000, SB1000T, SB170, SB3129, SB4138, SB530T, SB700T, SB7500, SB8000, SC3000, SC6600, SC707, SC9500, SE1800, SE-270D, SE-350, SE-400, SE425, SH6600, SM2700, SM3701, SM8270, SQ-9000, SQ9050, SQ9100, SQ9130, SQ9185, SQ9285, SQ9310, ST150HDH, ST371HD, ST531HD, ULT2001/2001N/2001C/2002D/2003D, VX3240, XB2500, XB2510, XL-2600/2600i/2610, XL2800, XL-3500/ t/ i/3510/3520, XL3700, XL-3750, XL3850, XL-5130/5232/5340, XL-5500, XL-5600, XL5600i, XL-5700, XL5800, XL5900, XL-6452, XL-6562, XM2701, XM2800, XM3700, XM3710, XR1300, XR1355, XR3140, XR3240, XR3340, XR3774, XR37T, XR4040, XR-52C, XR53, XR6060, XR-65T, XR-7700, XR-9000, XR9500PRW, XR9550/XR9550PRW, XS2070, XS2080, XS2100, XS3109, XS37, XS6060

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.