LB6810

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 12/12/2018
  • ID: faqh00000000_000

Incorrect thread tension

  • Even though the thread tension dial is set to the Standard/Basic setting, it may need to be adjusted depending on the combination of fabric, thread and needles being used.
  • Make sure you use a bobbin that is best suited for your machine.

 

The first 2-4 stitches of a seam may become weak.Sew reverse/reinforcement stitches at the beginning of your sewing.

 
 

Related FAQs

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

BB370, BM-2700, BM2800, BM-3600, BM3700, BM3730, BM3850, CS-80, CS-8060, GQ3700, GX37, H537ST, HE-120, HE-240, HE300, Innov-is 500D, Innov-is 900D, Innov-is 950D, Innov-is 990D, JX1400, JX1410, JX1710, JX2217, JX2517, LB6770/6770PRW, LB-6800, LB6810, LS-1217, LS-1520, LS-1717, LS-2000, LS-2020, LS-2125/2125i/2129, LS2250PRW, LS2300PRW, LS2350, LS2400, LS-30, LS-590, LX2375, LX2500, LX2763, LX3014, LX-3125/3125E, LX3850, MZ53, PE-150V, PE-170D, PE-180D, PS100, PS200T, PS-21, PS-3100/3700, SB170, SB530T, SB7500, SE-270D, SE-350, SE-400, SE425, SM2700, SM3701, ST371HD, ST531HD, VX3240, XB2500, XB2510, XL-2600/2600i/2610, XL2800, XL-3500/ t/ i/3510/3520, XL3700, XL-3750, XL3850, XL-5130/5232/5340, XL-5500, XL-5600, XL5600i, XL-5700, XL5800, XL5900, XL-6452, XL-6562, XM2701, XM2800, XM3700, XM3710, XR3774, XR37T, XR-52C, XR53, XR-65T, XS37

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit