MFC-J6545DW(XL)

FAQs & Troubleshooting

FAQs & Troubleshooting

Use PC-Fax Receive to Transfer Received Faxes to Your Computer (Windows® only)

Turn on the PC-Fax Receive feature, automatically store incoming faxes to your machine's memory, and then send them to your computer. Use your computer to view and store these faxes.
  • This feature is available only for black and white faxes. When you receive a color fax, your machine prints the color fax but does not send the fax to your computer.
  • Before you can set up PC-Fax Receive, you must install the Brother software and drivers on your computer. Make sure your computer is connected and turned on. You must have the PC-FAX Receiving software running on your computer.

Even if your computer is turned off, your machine will receive and store faxes in its memory. When you start your computer and the PC-FAX Receiving software runs, your machine transfers faxes to your computer automatically.

  1. Press [Settings]>[All Settings]>[Fax]>[Setup Receive]>[PC Fax Receive].
  2. Press [On].
    The touchscreen displays the message [Run the PC-Fax Receive program on your computer.]
  3. Press [OK].
  4. Press [<USB>] or press the name of the destination computer you want to receive faxes if you are on a network. Press [OK].
  5. Press [Backup Print: On] or [Backup Print: Off].
    When Fax Preview is turned on, a backup copy of received faxes will not be printed, even if you select [Backup Print: On].
  6. Press .

To change the destination computer, repeat these steps.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

MFC-J6545DW(XL), MFC-J6945DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.