HL-L6412DW

FAQs & Troubleshooting

FAQs & Troubleshooting
  • Date: 11/27/2018
  • ID: faq00100380_000

After the selected tray is out of paper, the Brother Machine prints by different paper size and paper types from another tray.

There is the case that after the selected tray is out of paper, the Brother Machine continues to print from another tray. In this case, configure the Auto Continue to Off. The default setting is On. Follow the steps below to configure the Auto Continue.

 

  1. Press  Settings(Settings) => All Settings => Printer => Auto Continue.
  2. Press Off.
  3. Press  Home(Home).

After configuring the Auto Continue to Off, configure the Tray Setting to the size you want to use.

If you configure the Auto Continue to Off, you cannot use customize paper in Printing Preferences.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-B7650DW, DCP-L2660DW, DCP-L5500DN, DCP-L5502DN, DCP-L5510DN, DCP-L5512DN, DCP-L5600DN, DCP-L5602DN, DCP-L5610DN, DCP-L5650DN, DCP-L5652DN, DCP-L5660DN, DCP-L5662DN, DCP-L6600DW, HL-EX415DW, HL-L2395DW, HL-L2480DW, HL-L6310DW, HL-L6412DW, HL-L6415DW(T), MFC-EX915DW, MFC-L2730DW, MFC-L2750DW(XL), MFC-L2759DW, MFC-L2807DW, MFC-L2820DW(XL), MFC-L2880DW(XL), MFC-L5700DW, MFC-L5702DW, MFC-L5705DW, MFC-L5710DN, MFC-L5710DW, MFC-L5715DW, MFC-L5717DW, MFC-L5800DW, MFC-L5802DW, MFC-L5850DW, MFC-L5900DW, MFC-L5902DW, MFC-L5912DW, MFC-L5915DW, MFC-L6700DW, MFC-L6702DW, MFC-L6750DW, MFC-L6800DW, MFC-L6810DW, MFC-L6900DW, MFC-L6902DW, MFC-L6912DW, MFC-L6915DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.

Submit