MFC-J1170DW

FAQs & Troubleshooting

FAQs & Troubleshooting

Paper is Jammed in the Front of the Machine (Jam Front)

If the LCD displays [Jam Front] or [Repeat Jam Front], follow these steps:

  1. Unplug the machine from the AC power outlet.
    IMPORTANT
    (MFC-J1010DW/MFC-J1012DW)

    Before you unplug the machine from the power source, you can transfer your faxes that are stored in the machine's memory to your computer or another fax machine so you will not lose any important messages.

  2. Pull the paper tray (1) completely out of the machine as shown by the arrow.
    image
  3. Pull the two green levers inside the machine to release the jammed paper.
    image
  4. Slowly pull out the jammed paper (1).
    image
    image

    If your LCD error message was [Repeat Jam Front], do the following:

    1. Make sure you look carefully inside (1) for any scraps of paper.
      image
    2. Squeeze both levers (1), and then open the Jam Clear Cover at the back of the machine.

      image

    3. Slowly pull the jammed paper out of the machine.
      image
    4. Close the Jam Clear Cover. Make sure the cover is closed completely.
      image
  5. Slowly push the paper tray completely into the machine.
    image
  6. Pull out the paper support (1) until it locks into place, and then unfold the paper support flap (2).
    image
  7. Reconnect the power cord.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

MFC-J1010DW, MFC-J1012DW, MFC-J1170DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.