MFC-L6902DW

FAQs & Troubleshooting

FAQs & Troubleshooting

Scan to Email Attachment

Send a scanned document as an email attachment.
  • Use the Scan button on the machine to make temporary changes to the scan settings. To make permanent changes, use Brother's ControlCenter software.
  • The Scan to Email feature does not support Webmail services. Use the Scan to Image or Scan to File feature to scan a document or a picture, and then attach the scanned file to an email message.

    The machine scans to your default email client.
  1. Load your document.
  2. Press [Scan].
  3. Swipe left or right to display [to E-mail].
  4. Press [to E-mail].
    The icon moves to the middle of the Touchscreen and is highlighted in blue.
  5. Press [to E-mail].
  6. If the machine is connected over the network, swipe up or down or press or to display the computer where you want to send data, and then press the computer name.

    If the LCD prompts you to enter a PIN for the computer, enter the four-digit PIN on the LCD, and then press [OK].

  7. Do one of the following:
    • To change the scan settings, press [Options], and then go to the next step.
    • To use the default scan settings, press [Start].

      The machine starts scanning. If you are using the machine's scanner glass, follow the Touchscreen instructions to complete the scanning job.

    To change scan settings, a computer with Brother's Control Center software installed must be connected to the machine.

  8. To scan both sides of the document (DCP-L5650DN/MFC-L5850DW/MFC-L5900DW/MFC-L6700DW/MFC-L6800DW):
    • Press [2-sided Scan], and then select the document type.
    Option
    Description
    2-sided Scan: Long Edge
    2-sided Scan: Short Edge
  9. Select the scan settings you want to change:
    • [Scan Settings]
    • [Scan Type]
    • [Resolution]
    • [File Type]
    • [Document Size]
    • [Brightness]
    • [Contrast]
    • [ADF Auto Deskew]
    • [Skip Blank Page]
    • [Remove Background Color]

      (available only for the [Color] and [Gray] options)

    To save the settings as a shortcut, press [Save as Shortcut].

  10. Press [OK].
  11. Press [Start].
    The machine starts scanning. If you are using the machine's scanner glass, follow the Touchscreen instructions to complete the scanning job.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

DCP-L5500DN, DCP-L5502DN, DCP-L5600DN, DCP-L5602DN, DCP-L5650DN, DCP-L5652DN, DCP-L6600DW, MFC-L5700DW, MFC-L5702DW, MFC-L5800DW, MFC-L5802DW, MFC-L5850DW, MFC-L5900DW, MFC-L5902DW, MFC-L6700DW, MFC-L6702DW, MFC-L6800DW, MFC-L6902DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.