DCP-T510W
 |
FAQs & Troubleshooting |
Copy an ID Card
Use the [2in1(ID)] feature to copy both sides of an identification card onto one page, keeping the original card size.
Make sure the paper size is set to Letter or A4.
- You may copy an identification card to the extent permitted under applicable laws. For more detailed information, see the Product Safety Guide.
DCP-T310/DCP-T510W/DCP-T710W/MFC-T810W
- Place your identification card face down near the upper-left corner of the scanner glass.
- 0.12 in. (3 mm) or greater (top, left)
- 8.4 in. (213 mm)
- 5.4 in. (137 mm)
- Scannable area
- (MFC-T810W) Press
(COPIA (COPY)). - Enter the number of copies in one of the following ways:
- (DCP-T510W/DCP-T710W) Press
or 
on the control panel. - (MFC-T810W) Enter the number of copies using the dial pad.
- (DCP-T310) Press Número copias (Number of Copies) repeatedly.
- Press Opciones (Options) or Opciones de Copia / Escáner (Copy / Scan Options) and or to select [Layout(2in1 ID)]. Press OK.
- Press or to select [2in1(ID)]. Press OK.
- Press Inicio Negro (Black Start) or Inicio Color (Color Start).The machine starts scanning one side of the identification card.
- After the machine has scanned the first side, turn over the identification card and press Inicio Negro (Black Start) or Inicio Color (Color Start) to scan the other side.
MFC-T910DW
- Place your identification card face down near the upper-left corner of the scanner glass.
- 0.12 in. (3 mm) or greater (top, left)
- 8.4 in. (213 mm)
- 5.4 in. (137 mm)
- Scannable area
- Press (COPIA (COPY)).
- Enter the number of copies using the dial pad.
- Press or to select the following:
- Select [Page Layout]. Press OK.
- Select [2in1(ID)]. Press OK.
- Press Inicio Negro (Black Start) or Inicio Color (Color Start).The machine starts scanning one side of the identification card.
- After the machine has scanned the first side, turn over the identification card and press
to scan the other side.
Content Feedback
To help us improve our support, please provide your feedback below.
