MFC-J6710DW

FAQs & Troubleshooting

FAQs & Troubleshooting

Choosing the paper tray my Brother machine will use for copying.

You can choose the tray your Brother machine will use for copying.

Poster copy is not available when you use Tray #2.
Setting tray use for the next copy job

To change the tray use for the next copy job, follow these steps:

*If your Brother machine has a touchscreen, please follow the steps under "For touchscreen models" below.

  1. Press the COPY key to illuminate it.

  2. Do one of the following:

    • Place the document you want to copy face up in the Automatic Document Feeder (ADF).

    • Place the document you want to copy face down on the flat scanner glass.

  3. Use the dial pad to enter the number of copies you want to make.

    You can make up to 99 copies at once.

  4. Press the UP OR DOWN ARROW key to choose Tray Select.

  5. Press the LEFT OR RIGHT ARROW key to choose the tray you want to use.

    • You can choose Tray #1, Tray #2, or Auto Select.

    • Auto Select will allow your machine to feed paper from either Tray #1 or Tray #2, using the paper type and size settings from the COPY key menu.

  6. Press the OK key.

  7. Do one of the following:

    • Press the Black (Mono) Start key to make a black and white copy.

    • Press the Color (Colour) Start key to make a color copy.

<For touchscreen models>

  1. Press the COPY key to illuminate it.

  2. Do one of the following:

    • Place the document you want to copy face up in the Automatic Document Feeder (ADF).

    • Place the document you want to copy face down on the flat scanner glass.

  3. Use the dial pad to enter the number of copies you want to make.

    You can make up to 99 copies at once.

  4. Press LEFT OR RIGHT ARROW to display Tray Select.

  5. Press Tray Select.

  6. Press Tray #1, Tray #2, or Auto Select.

    Auto Select will allow your machine to feed paper from either Tray #1 or Tray #2, using the paper type and size settings from the COPY key menu.

  7. Do one of the following:

    • Press the Black (Mono) Start key to make a black and white copy.

    • Press the Color (Colour) Start key to make a color copy.

Changing the default tray use for copying

To change the default tray use setting for copying, follow these steps:

*If your Brother machine has a touchscreen, please follow the steps under "For touchscreen models" below.

  1. Press the Tray Setting key.

  2. Press the UP OR DOWN ARROW key to choose Tray Use: Copy.

  3. Press the LEFT OR RIGHT ARROW key to choose Tray #1, Tray #2, or Auto Select.

    Auto Select will allow your machine to feed paper from either Tray #1 or Tray #2, using the paper type and size settings from the COPY key menu.

  4. Press the OK key.

  5. Press the UP OR DOWN ARROW key to choose Complete.

  6. Press the OK key.

<For touchscreen models>

  1. Press the Tray Setting key.

  2. Press the UP OR DOWN ARROW to display Tray Use: Copy.

  3. Press Tray Use: Copy.

  4. Press Tray #1, Tray #2, or Auto Select.

    Auto Select will allow your machine to feed paper from either Tray #1 or Tray #2, using the paper type and size settings from the COPY key menu.

  5. Press the STOP/EXIT key.

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

MFC-J6710DW, MFC-J6910DW

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.