Send a fax without scanning the documents into memory.
When your Brother machine's memory is full, it cannot scan documents into memory before faxing them. Real Time Transmission allows you to send faxes without first scanning the documents into memory.
When Real Time Transmission is on, you place the document in the Automatic Document Feeder (ADF) or on the flat scanner glass and dial the fax number you want to send to. As soon as your fax line is free, your machine will dial the fax number and send the fax in real time.
You can make Real Time Transmission for all faxes or temporarily activate it for the next fax you send.
Follow the steps below to turn Real Time Transmission ON:
Press (FAX).
Press Menu, 3, 2, 3.
Do one of the following:
If you want to make Real Time Transmission for all faxes, Press the Up or Down arrow key to choose Realtime TX:On. Press OK. Go to STEP 4.
If you want to make Real Time Transmission for the next fax only, press the Up or Down arrow key to choose Next Fax Only. Press OK.
Press the Up or Down arrow key to choose Next Fax:On. Press OK. Go to STEP 4.
Press 2 so you can continue sending your fax.
Load your document.
Enter the fax number you want to send to.
Do one of the following:
Press the Black (Mono) Start key to send a black and white fax.
Press the Color (Colour) Start key to send a color fax. (some models only)
When you are using Real Time Transmission, the automatic redial feature will not work when you send a fax from the flat scanner glass.
If you are sending a color fax, the machine will send the fax in real time even if Real Time Transmission is off.
If your question was not answered, have you checked other FAQs?
(FAX).
