MFC-J460DW

FAQs & Troubleshooting

FAQs & Troubleshooting

Clean the paper pick-up rollers

Follow the steps below to clean the paper pick-up rollers.

 

  1. Unplug the machine from the AC power outlet (electrical socket).
     
  2. If the paper support flap is open, close it, and then close the paper support.
     
  3. Pull the paper tray completely out of the machine.

    If the machine has been feeding multiple pages when there are only a few sheets of paper left in the tray, clean the Base Pad (1) with a soft lint-free cloth moistened with water.
    (For models with photo paper tray or photo bypass tray)
    Also clean the Base Pad (2) for the photo paper tray with a soft lint-free cloth moistened with water.

    After cleaning, wipe the pad with a dry, soft lint-free cloth to remove all moisture.

    Clean Base Pad

  4. Clean the Paper Pick-up Rollers (1) with a soft lint-free cloth moistened with water. Slowly turn the rollers so that the whole surface is cleaned. After cleaning, wipe the rollers with a dry, soft lint-free cloth to remove all moisture.

    Clean Paper Pick-up Rollers

     

  5. Put the paper tray firmly back in the machine.
     
  6. Re-connect the power cord.

 

If your question was not answered, have you checked other FAQs?

Have you checked the manuals?

If you need further assistance, please contact Brother customer service:

Related Models

MFC-J460DW, MFC-J480DW, MFC-J485DW, MFC-J680DW, MFC-J775DW(XL), MFC-J880DW, MFC-J885DW, MFC-J985DW(XL)

Content Feedback

To help us improve our support, please provide your feedback below.

Step 1: How does the information on this page help you?

Step 2: Are there any comments you would like to add?

Please note this form is used for feedback only.